Screw-jack pressing device
The catalogue identifies the screw jack as the means of closing the filter pack. Ask for the selected model’s closing procedure and safe operating requirements rather than inferring them from the product photograph.
Client-selected product photographs. Exact model and supplied configuration require confirmation.
Chamber filtration · Screw-jack closing
Manual Chamber Filter Press
The manual chamber family uses a screw jack to close the plate pack. Explore its filtration arrangement, source parameter rows and media requirements before choosing an equipment configuration.
- Closing device
- Screw jack described in the catalogue
- Source table
- 14 reference rows; exact model code to confirm
- Process requirements
- Feed supply, cloth and discharge arrangement to confirm
Mechanical closing. Material-specific filtration.
Mechanical closing of the plate pack
The manual-jack catalogue describes a screw jack as the pressing device. This identifies the closing mechanism; it does not establish the complete feed system or the utilities needed for a filtration process.
Define the separation and handling
Filtration retains solids on the filter media while liquid passes through. Confirm the cloth, feed arrangement, cake handling and closing requirements for the selected manual chamber configuration.
Source: the supplied Manual Jack Filter Press catalogue. Its statement about no power supply concerns the described manual closing device; it is not a guarantee that an entire filtration installation needs no electrical equipment.
Understand this equipment family.
Filter plates and cloth
The source catalogue includes separate filter-plate and filter-cloth component references. The required cloth material and retention must be matched to the feed; they are not specified by the family name alone.
A range of reference sizes
The supplied sheet contains fourteen rows with different filtration areas, chamber volumes and plate counts. Actual plate dimensions are a separate column and must not be inferred from a model-code suffix.
Review the source parameters.
14 source rows
Scroll sideways to view all table columns. Confirm the exact model and configuration before using these reference figures.
| Source row ID¹ | Area (m²) | Plate size (mm) | Cake thickness (mm) | Chamber volume (L) | Plate count | Source weight (kg) | L × W × H (mm) |
|---|---|---|---|---|---|---|---|
| 1/380 | 1 | 380 × 380 | 30 | 15 | 4 | 490 | 1230×570×660 |
| 2/380 | 2 | 380 × 380 | 30 | 31 | 9 | 528 | 1455×570×660 |
| 3/380 | 3 | 380 × 380 | 30 | 46 | 14 | 550 | 1680×570×660 |
| 4/500 | 4 | 500 × 500 | 30 | 60 | 9 | 780 | 1630×800×900 |
| 6/500 | 6 | 500 × 500 | 30 | 91 | 14 | 830 | 1880×800×900 |
| 8/500 | 8 | 500 × 500 | 30 | 121 | 19 | 880 | 2130×800×900 |
| 10/500 | 10 | 500 × 500 | 30 | 151 | 24 | 930 | 2380×800×900 |
| 12/500 | 12 | 500 × 500 | 30 | 182 | 29 | 980 | 2630×800×900 |
| 15/500 | 15 | 500 × 500 | 30 | 225 | 36 | 1030 | 2980×800×900 |
| 16/500 | 16 | 500 × 500 | 30 | 243 | 39 | 1050 | 3130×800×900 |
| 15/700 | 15 | 700 × 700 | 30 | 226 | 18 | 1257 | 2250×1080×1060 |
| 20/700 | 20 | 700 × 700 | 30 | 297 | 24 | 1347 | 2550×1080×1060 |
| 30/700 | 30 | 700 × 700 | 30 | 452 | 37 | 1693 | 3200×1080×1060 |
| 40/700 | 40 | 700 × 700 | 30 | 595 | 49 | 2193 | 3900×1080×1060 |
¹ Reference row labels. Area and plate dimension identify a source row. Unclear model-code suffixes have not been reconstructed.
Read the plate-size column directly. The sheet pairs model groups containing /320, /450 and /630 with plate dimensions of 380 × 380, 500 × 500 and 700 × 700 mm. Those are different source fields. The table below preserves the actual plate dimensions and uses area/plate reference labels instead of reconstructing model codes.
The source sheet prints a filtration-pressure limit of ≤0.6 MPa. This is withheld from the comparison until the exact model and permitted operating conditions are confirmed. It is not a guaranteed duty rating for the photographed press.
No motor figure is supplied for these rows. Manual closing does not determine the power requirements of a separate feed pump or other equipment.
Source: the supplied Manual Chamber Filter Press parameter sheet, page1. Overall dimensions are source values; foundation figures are not used as installation instructions. Pressure ratings require model-specific verification.
Resolve the model-specific limits.
Check the complete working arrangement.
Provide the feed composition, solids loading, temperature, separation objective and intended method of moving the cake. Confirm pressure, media compatibility and the model-specific closing and handling requirements.
Model identification still required
The model-code and plate-size relationship needs supplier confirmation. Do not use a suffix as a plate measurement or the source table as an installation specification. No cycle time, throughput or ease-of-operation guarantee is asserted.
Structure, installation and care.
Identify the jack, pack and media.
The catalogue distinguishes the pressing device, filter plates and filter cloth. The two client-selected photographs show the family, but no dimensioned component or installation drawing has been matched to a model.
Request before installation or maintenance
A selected-model arrangement, foundation and connection schedule, closing instructions, plate and cloth replacement guidance, and an operating/maintenance manual. The supplied operation video has not been reviewed and is not presented as instructions.
Start with the actual material.
Mineral and chemical streams
The manual-jack catalogue lists coal washing, inorganic salts, chemicals and metallurgy.
Process industries
Alcohol production, pharmacy, food and textile applications are also listed. Required contact materials and hygiene conditions must be verified separately.
Environmental and energy contexts
The catalogue also mentions environmental protection, energy and coal/carbon-related uses. Share the actual stream and separation requirements before equipment selection.
Application names are catalogue context, not evidence of suitability or results for every feed material.
Evidence for the selected model.
Factory and equipment photographs are available in the supplied materials. A model-matched project record and complete certificate scope have not yet been verified.
Awaiting confirmation: certificate annex and applicable models, complete ISO evidence, project dates, photograph attribution and measured results. No certification badge or performance result is asserted here.
View the limited customer display examples →Discuss the support you need.
Gaode Equipment provides engineering services alongside equipment sales. The scope and responsibilities need to be agreed for your project.
Discuss engineering requirementsScope awaiting confirmation
Process design, system integration, installation, commissioning, service locations, delivery times and warranty terms are not included as assumed commitments.
Tell us about your material.
Share the material, process conditions, intended separation and project location. Tell us which specifications you need to resolve.
Online delivery is not enabled in this preview. The form checks your entries; it does not send an inquiry.
